Description

The SMSCOM SPC MK2 16A Expansion Module allows the SPC SMSCOM 16A extraction regulator to be expanded by 16 amps, allowing automatic control of the temperature and extraction speed parameters for a total of up to 32 amps, approximately 7000w of power. This module connects completely independently to the electrical network and through a cable to the SPC SMSCOM regulator. It is controlled electronically in a very simple way and precisely ensures the temperature that we select in the closet or the grow room by controlling the speed of the fans.

The SPC SMSCOM 16 Amp controller features a Plug & Play design for easy operation. It has two modes of operation, either automatic or 100%. The speed control via the temperature sensor is very precise and the minimum adjustable speed ranges from 20% to 60%, while the maximum ranges from 60% to 100%. The temperature range in which this controller works can be adjusted between 10ºC and 45ºC, with an adjustable bandwidth between 2ºC and 7ºC.

With the SPC SMSCOM controller you can optimally control the climate. The SPC is fully automatic and can be easily adjusted. With the SPC driver you can set various data. You can not only adjust the temperature, but also the maximum and minimum suction power. Thanks to the continuous temperature controller, the SPC always guarantees that the climate at all times is optimal. This climate controller comes fully assembled and includes the plug and temperature sensor with a 2 meter long cable.

The SPC MK2 is an automatic temperature controller for fan control. The SMSCOM SPC 16 amp is controlled electronically and ensures in a simple and precise way, the appropriate temperature of the room.

Control the correct speed for your fans and maintain the correct temperature. 5 units can be connected to the SPC.

Type: 00-1010-UE;
Capacity: up to 16 amps;
Voltage: 220 ~ 240 volts;
Frequency: 50/60 Hz;
The dynamic range: 0.5 / 16 Amps;
Temperature sensor: 4K7 at 25 ° C;
Bandwidth: 1 ~ 7 ° C.

Additional information